|
SKYDEK II is an
ultra light
profile ideal
for cost and
time saving in
modern
construction.
Its contemporary
design coupled
with the
inherent
properties of
high tensile
steel makes it
suitable for
vertical
cladding and
roofing to as
low as 3º pitch.
It is popularly
used for
residential,
industrial and
commercial
applications.
LENGTHS
All products are
available from,
DURO
Distributors in
lengths up to 21
metres custom
cut to your
length
requirements.
Lengths longer
than 21 metres
can be supplied,
provided
satisfactory
transport and
on-site handling
can be arranged.
TOLERANCES
Length: +0, -
15mm
Cover width: +_
4mm
PACKING
Sheets are
packed in
strapped bundles
of one tonne
maximum mass
MINIMUM ROOF
SLOPE
The normal
recommended
minimum roof
slope is 1 in 20
(approximately
30) However, in
non-cyclonic
areas where
roofs are in
single sheet
lengths, with a
run of less than
1 5 metres, a
minimum roof
slope of 1 in 30
(approximately
20) may be used.
For recommended
slope of roofs
in cyclonic
areas, please
consult our DURO
Distributor’s
Office.
|
