ECODEK is a
superior light
weight
roll-formed roofing
and wall
cladding profile
to meet all your
designing needs. |
|
|
»
Metal Roofing
Solution |
Profile Specifications
LENGTHS
All products are
available from, DURO
Distributors in lengths
up to 21 metres
custom-cut to your
length requirements.
Lengths longer than 21
metres can be supplied,
provided satisfactory
transport and on-site
handling can be
arranged.
TOLERANCES
Length: +0, - 15mm
Cover width: +_ 4mm
PACKING
Sheets are packed in
strapped bundles of one
tonne maximum mass
MINIMUM ROOF SLOPE
The normal recommended
minimum roof slope is 1
in 20 (approximately 30)
However, in non-cyclonic
areas where roofs are in
single sheet lengths,
with a run of less than
1 5 metres, a minimum
roof slope of 1 in 30
(approximately 20) may
be used. For recommended
slope of roofs in
cyclonic areas, please
consult our DURO
Distributor’s Office.
|
