3 Pan Klip System

Home | Products | About us | Corporate | Contact us

Duro Products
	Skydek II
	3 Pan Klip System
	Durospan
	V-Clad 750
	Durodek™
	C & Z Purlins

DURO Metal Industrial (M) Sdn Bhd, is one of the Malaysia's largest and most global metal roofing and structural manufacturer & distributor. Today, DURO Metal can pride itself for meeting stringent standards in a global market for its manufacturing and technological innovations.

Duro 3 Pan Klip System

Duro 3 Pan Klip System is made of zincalume/colour coated steel that complies with ASTM A792-G550-AZ150 (550 MPa minimum yield strength, 150g/m², minimum coating mass as determined by the prescribed triple sport test). The colorlume steel used in the manufacture of Duro 2 Pan Klip System complies with ASTM A806 "Prepainted and Organic Film/Metal Laminate Products".

PROFILE (Minimum Recommended Pitch: 1º(1 in 55)

Recommended maximum Support Spacing

Base Metal Thickness	Recommended Maximum Support						Maximum Cantilever
	Roof			Wall
	Single Span	Internal Span	End Span	Single Span	Internal Span	End Span
mm	mm	mm	mm	mm	mm	mm	mm
0.42	1400	1600	1500	2000	2400	2100	200
0.48	1600	2100	1800	2300	2900	2700	250
0.60	2000	2700	2300	2500	3000	2900	300

Profile Specifications

	Economy		Regular		Heavy
	Zincalume	Colorlume	Zincalume	Colorlume	Zincalume	Colorlume
Base Metal Thickness	0.42		0.48		0.60
Total Coated Thickness	0.47		0.53		0.65
Mass per unit area (kg/m²)	4.80	4.90	5.45	5.55	6.76	6.85
Mass per unit length (kg/m)	3.17	3.23	3.60	3.66	4.46	4.52
Coverage (m²/t)	208	204	183	180	148	146

Load Tables (Uniformly Distributed Load Over Continuous Span Condition.

Base Metal Thickness	Span (mm)		900	1050	1200	1350	1500	1650	1800	1950	2100	2400
0.42mm	Safe Imposed Load	kPa	6.7	5.6	4.4	3.5	2.9	2.3	2.0	1.7	1.4	1.1
	Deflection	mm	2.9	3.6	4.6	5.8	7.4	9.3	10.8	12.8	15.4	20.0
	Safe Wind Uplift	kPa	2.8	2.5	2.1	1.9	1.7	1.6	1.5	1.4	1.3	1.1
0.48mm	Safe Imposed Load	kPa	8.9	6.6	5.1	4.0	3.3	2.7	2.3	2.0	1.7	1.3
	Deflection	mm	3.1	4.1	5.4	6.5	8.3	10.1	11.8	14.1	15.9	20.3
	Safe Wind Uplift	kPa	3.8	3.4	2.9	2.5	.0	1.9	1.7	1.6	1.5	1.3
0.60mm	Safe Imposed Load	kPa	11.6	8.6	6.6	5.2	4.3	3.5	3.0	2.6	2.2	1.7
	Deflection	mm	3.0	4.0	5.2	6.5	8.1	9.6	11.6	13.8	15.5	20.2
	Safe Wind Load	kPa	5.7	4.9	4.3	3.5	2.6	2.4	2.1	2.0	1.9	1.7

Standard Thickness

THK	Material Coating
MM/bst	Material Coating
0.42	Colorcoat	Zincalume	Colorbond	Prima Maju
0.48	Colorcoat	Zincalume	Colorbond	Prima Maju
0.60	Colorcoat	Zincalume	Colorbond	N.A

Tolerances
Length: 0, -15mm

Cover width: ≠ 3mm

Packing

Sheets are packed in strapped bundles of one tonne maximum mass

Lengths

All products are available from Duro Distributors in length up to 21 meters customs - cut to your length requirements. Lengths longer than 21 meters can be supplied, provided satisfactory transport and on-site handling can be arranged or by site-rollforming.

Minimum Roof Slope

It is recommended that a minimum slope of 1 in 55 or approximately 1º be provided. Also ensure that supports are in the same plane. Variation at the time of fixing - or the uneven shrinking of timber supports that may take place later - can cause a zero or negative fall. However, it is wise to provide for a minimum slope of 1 in 30 (approximately 2º) to ensure a positive fall and to avoid any danger of 'ponding' which could lead to a reduced service life.

Application of Duro 3 Pan Klip System

A triple pan profile utilising a powerful clip system.

Duro 3 Pan Klip System

Is suitable for roofing applications on very long roofs down to 1º pitch. The 3 Pan Klip System with triple pan eliminates up to 4% of the side laps required in a double pan profile and therefore offers much more superior protection against leakage, particularly in places with heavy rainfall, a typical characteristics of the Malaysian climate.

Duro 3 Pan Klip System

Is economical to use due to its great spanning capability over other profiles and as such it helps to reduce steel purlin cost. Furthermore, for very long, low pitched roof, on-site rolling becomes a necessity and Duro offers this great flexibility.